Gas Water Heater Troubleshooting Advice

Posted by on Oct 31, 2013 in Gas Water Heater Repair Tampa, Water Heater Repair Tampa

So the gas water heater in ones home is not performing as well as it should? It is generally one of simply a couple of things that will go wrong with the unit. Review these ideas below to see if you are able to assess exactly what the cause might be. We can be reached anytime to aid with this also!

Pilot Lights

Gas hot water heater fixing always seems to begin with the pilot light. A lot of gas hot water heaters us a pilot light to fire up the burner. There are some more expensive models that make use of electronic ignition. When the pilot light is out or won’t remain on, you will not have hot water.


The thermocouple is a sensor that informs the gas valve when to enable gas to flow to the burner. Gas hot water heater troubleshooting typically includes the thermocouple. When they decay the will not allow the gas valve to release any gas. No gas, no hot water.


The thermostat is part of the gas valve. There is not a lot that can be done to take care of one that is bad, short of changing the gas valve. The major interested in the thermostat is getting the temperature level correct. Water that is too hot can be dangerous. Discover exactly what the appropriate setups are.

Gas Valves

The gas valve regulates the gas that goes both to the pilot light and the primary burner. It uses the thermocouple to identify when it is safe to release the gas. It also uses an essential thermostat to understand when more heat is needed. Explosions can result from gas that is not burned. Therefore the water heater gas valve has safety devices constructed in.


Obstructions in the vent pipe can restrict the air flow to your water heater. This will trigger the burner to run inadequately. It can suggest a lowered quantity of hot water. Badly obstructed vents will result in hazardous gases building up in the home.

Here is a nice video on routine maintenance tasks for a gas water heater: